Top one tech is a touch screen display supplier, specialized in custom touch display prototyping and low volume manufacturing services since 2010!
                     Hablamos español, no dude en contactarnos: Whatsapp:008613631610695 

Six elements to determine whether the LED display is normal

by:Toponetech     2021-05-20
Recently, when I visited the customers, they all lamented that our LED electronic displays are excellent in all aspects. How did they decide? Let us take a look at the six elements that determine whether the LED electronic display is normal: brightness and viewing angle, color reproduction, white balance effect, whether there are color blocks, flatness, whether there are mosaics, and dead spots. The six elements to determine whether the touch display is normal are as follows:    1. Brightness and viewing angle The brightness of the indoor full-color LED screen must be above 800cd/m2, and the brightness of the outdoor full-color screen must be above 1500 cd/m2 to ensure the display. If the brightness is too low, the displayed image cannot be seen clearly. The size of the brightness is mainly determined by the quality of the LED die. The size of the viewing angle directly determines the audience of the display screen, so the larger the better. The size of the viewing angle is mainly determined by the packaging method of the die.  2, color reproducibility   color reproducibility refers to the reducibility of the color of the display screen, which means that the color displayed on the display screen must be highly consistent with the color of the playback source, so as to ensure the realism of the image.  3, white balance effect    white balance effect is one of the most important indicators of the display screen. In color science, pure white will be displayed when the ratio of the three primary colors of red, green and blue is 1:4.6:0.16. If the actual ratio is a little different, the white balance will be deviated. Generally, pay attention to whether the white is blue or yellow. Green phenomenon. The quality of the white balance is mainly determined by the control system of the display, and the die also has an impact on the color reproduction.  4. Flatness  The surface flatness of the display should be within ±1mm to ensure that the displayed image is not distorted. Partial protrusions or recesses will cause a blind spot in the viewing angle of the display. The quality of flatness is mainly determined by the production process.  5. Whether there is mosaic or dead spot phenomenon  Mosaic refers to the small four squares that are always bright or black that appear on the display screen, which is the phenomenon of module necrosis. The main reason is that the quality of the connectors used in the display screen is not good. Dead point refers to a single point that is always bright or black that appears on the display. The number of dead points is mainly determined by the quality of the die. 6. With or without color block Color block refers to the obvious color difference between adjacent modules. The color transition is based on the module. The color block phenomenon is mainly caused by the poor control system, low gray level, and scanning Caused by lower frequency.   check all kinds of LED electronic display, outdoor touch display, indoor LED display for you!
Top One Tech Ltd. is famous for creating innovative products like the About Us and supporting their market leadership with savvy marketing campaigns to build an elite brand.
Toponetech touch display has a whole range of different items to help you make an informed choice every time you make a purchase. Check it!
Top One Tech Ltd. always think about our customer first. To determine what the consumers would want out of their relationship on social, and work from there.
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
To begin creating your touchscreen display project, please contact us for a quote and sample drawing. Mobile Phone : (+86)13631610695 Whatsapp/Wechat :+8613631610695 Email : Skype :