1, the LED display
of perspective view depends on the Angle of LED lamp bead.
To date, most outdoor display screen choose horizontal Angle 100 °;
50 ° and vertical perspective;
Elliptical LED, indoor display, choose level is 120 ° from vertical;
The SMD leds.
Display on the highway 30 ° is generally selected due to its particularity;
Perspective of round LED is enough.
Some buildings on display for vertical Angle of the demand is higher.
Perspective with brightness incompatible, big Angle will inevitably reduce brightness.
View selection need according to the specific purposes to decide.
2, the brightness of LED brightness is an important determinant of the display brightness.
LED brightness is higher, the greater the allowance of using current, is good to save electricity, stabilizing the leds.
LED value has a different point of view, in the case of chip brightness is set, the smaller the Angle, the LED is more bright, but the smaller screen view.
Generally should choose 100 degrees of LED display screen enough to ensure that the point of view.
In view of the different spacing and different visual display, should be in brightness, Angle and find a balance on the price.
3, failure rate due to full-color displays by tens of thousands or even hundreds of thousands of set of red, green, blue three kinds of LED pixels, any color LED display screen overall failure will affect visual result.
In general, according to industry experience, at the beginning of the LED display assembly to aging failure rate of 72 hours before delivery should be no more than three over ten thousand (
Refers to the LED lamp bead itself causes of failure)
4 LED is a semiconductor device, antistatic ability, is sensitive to electrostatic, easily lead to static electricity failure, so the antistatic ability is very important to the life of the screen.
In general, the LED pattern of human body electrostatic voltage test failure should not be less than 2000 v.
5, life LED theoretical service life of the device for 100000 hours, far more than other parts of LED display working life, so the right LED device quality guarantee, the working current, reasonable PCB thermal design, display production process is rigorous, LED display screen machine device will be in one of the most durable components.
LED devices accounted for 70% of the proportion of LED display price, so the LED device can determine the merits of the LED display quality.
Is the production of LED devices power in our country, but also made the LED display screen.
The high technical requirements of the LED display is the future trend of development, high quality requirement of the LED display, not just about LED display manufacturers, is also involved in the development of LED display screen device manufacturers.
From the LED device control, and promote China made by the LED display power to the LED display manufacturing powerhouse.
6, attenuation characteristic of LED display screen for a long time after work will be a drop in brightness and screen color is not consistent with the phenomenon, is mainly due to the attenuation of the brightness of the LED device.
LED brightness attenuation will cause the whole screen brightness to reduce.
Red, green, and blue LED brightness attenuation amplitude inconsistent will cause color LED display, is often said that the screen we spent.
High quality LED device can effectively control brightness attenuation amplitude.
By 1000 hours at room temperature light 20 ma standards, attenuation should be less than 2%, red, blue, green attenuation should be less than 10%, in blue, green LED display screen design as far as possible not to use when 20 ma current, had better use only 70% to 80% of the rated current.
Attenuation characteristics in addition to the associated with red, green and blue leds itself characteristic, using current, PCB thermal design, display affect attenuation using the environment temperature, etc.
Small make up compiled to be red, green, blue three kinds of LED brightness changes when matching consistency in different angles, encapsulated lens design, choice of raw materials is needed in the strict scientific design, this depends on the technical level packaging suppliers.
The normal direction of the white balance again good display, if the Angle of the leds consistency is not good, the whole screen different point of view of the white balance effect will be bad.
The Angle of the LED lamp bead consistency features available LED Angle, a comprehensive test instrument to measure is particularly important for medium and top grade display screen.
need huge investment, so it is important to shop with caution.
Now you can enjoy lcd monitor supplier with Top One Tech Ltd. 's latest collection of lcd monitor supplier About Us products. Do visit now, at Toponetech touch display
It is essential to know the basic functioning of to help us understand the components and the part they play.
Many business owners and professionals use services like Top One Tech Ltd. to stay on top of manufacturing industry, monitor products’ quality and keep an eye on competitors.
There are different types of , mainly lcd monitor supplier and lcd monitor supplier.