Top one tech is a touch screen display supplier, specialized in custom touch display prototyping and low volume manufacturing services since 2010!
                     Hablamos español, no dude en contactarnos: Whatsapp:008613631610695 

It is a good LED display also should pay attention to maintenance and cleaning

by:Toponetech     2021-03-03
In use process because of pollution, loose, vibration, heat, environmental factors such as temperature change of fault, affect the normal use of the LED display, and even cause serious accidents. Therefore, the LED display as a regular maintenance is necessary. Then LED display daily maintenance is mainly do what? A, inspection, LED display circuit diagram are commonly use inspection system 'month', a large LED display maintenance 'weekly inspection system is implemented, the specific content of the maintenance and response speed commitment: 1, the LED display screen body maintenance, including bulb, module, the module, power supply, control card; 2, LED display control system maintenance, including controller, optical switch card, distributor, sending card; 3, LED display special operating software, contains the player software maintenance and upgrade; 4, on a regular basis ( C) once a month Technical personnel on-site inspection, inspection and maintenance for system; 5, major events: position the company technical personnel to guide to ensure the on-site activities smoothly. 6, for outdoor LED display, such as wind, rain, thunder, electric injury caused by natural factors, is not in the scope of the warranty. To the owner to the insurance company is cast protect, pay by insurance company. The general faults of 7, during the period of maintenance service, 8 hours to solve the problem of maintenance, major accident is not more than 24 hours. Maintenance to replace modules such as accessories, not more than 24 hours. After completion of maintenance, more than one service to ensure that the screen does not appear module level ( Such as partial color, module black, a column is not bright, etc. ) Failure, normal play. Second, clean up for screen protection grade is low, especially the outdoor screen, the atmosphere with ash from the vent into the equipment, for the fan equipment can accelerate worn or damaged. Dust will fall within the display control device surface, reduce the thermal conductivity and insulation performance, dust absorption of moisture in the air in case of wet weather lead to short circuit; Long-term can also lead to PCB and electronic components of mildew, the equipment technical performance, fault occurs. So, LED display the cleanup looks be like simple, actually is an important link in maintenance. Three, fastening the LED display screen belongs to high power consumption equipment, run after a period of time, due to stop and run for many times, including the terminal of the power supply part due to the hot and cold can cause looseness, contact not firm, form virtual connect, serious when fever, even raising beside the plastic components. Signal terminals will be due to the environmental change of temperature cold heat is loose, high lead to poor contact, then result in equipment failure, so must be carried out on the fittings of LED display fastening on a regular basis. In fasteners, during adjustment should be forcibly even properly and ensure solid and effective. Four, the display screen surface cleaning in bright and black screen under the two states, carried out on the LED display visual examination. Including: screen surface is polluted, the purpose is to remove surface dirt effect on the luminescence properties; Screen surface without damage cracks; Communication distribution cable circuit is normal; For the high protection grade of equipment, although due to choose the high reliability of components and connectors, but led to its closure become key factors, therefore, regularly check the seal in good condition; Steel structure to check for outdoor screen surface paint and rust; For outdoor screen surface pollution is particularly serious, but also on the display surface cleaning. LED display cleaning if aerial work, need to be equipped with professional cleaning team. Cleaning the overhead wire way ( Commonly known as spider-man) Or use blue, allocation of professional cleaning equipment, cleaning personnel according to the different dirt of screen choose different targeted cleaner, to ensure that under the premise of without causing damage to the LED tubes and mask to complete the work of cleaning the LED display.
There are many issues that affect lcd monitor supplier, which has led to the need of getting specialists trained in certain areas so as to handle all issues that may arise as well as About Us products that can solve lcd monitor supplier problems.
Top One Tech Ltd. is committed to attracting, developing, and keeping a diverse work force that reflects the nature of our global business.
Top One Tech Ltd. can promise that About Us is one of the best products sold in the worldwide market at present.
Custom message
Chat Online 编辑模式下无法使用
Leave Your Message inputting...
To begin creating your touchscreen display project, please contact us for a quote and sample drawing. Mobile Phone : (+86)13631610695 Whatsapp/Wechat :+8613631610695 Email : sales@toponetech.cn Skype : elsieyu-sz@hotmail.com