With the advent of summer, the hot weather has increased the difficulty of maintenance for many outdoor LED electronic display
s. In the hot summer, how can outdoor full-color LED electronic display screens not be affected by high temperature and reasonably dissipate heat? The heat dissipation suggestions are given below for LED electronic display screens with an area of u200bu200bless than 20 square meters and an area of u200bu200bmore than 20 square meters. 1. For places north of Guangdong Province, it is recommended not to use air conditioners for LED electronic displays within 20 square meters. If conditions permit, two small fans are sufficient. 2. Some cities in the south: Guangdong, Guangxi, Hainan, Wuhan, Chongqing and other places need to install two fans. It is enough to install fans with a diameter of about 500mm, depending on the size of the installation space. [LED electronic display] How to dissipate the heat of the led electronic display of more than 20 square meters? 1. If the LED electronic display is installed against the wall, it depends on how much the LED electronic display can protrude. If it can protrude one meter from the wall, it is recommended to choose the fan according to the area, and the fan should be installed on the screen. The upper side of the side is lined up in sequence. If the customer buys a P16 outdoor LED full-color touch display of 80 square meters, he must choose 6 axial fans with a diameter of about 600mm. Special attention should be paid to ensure that the fan is exhausted to the outside and equipped with a protective net to prevent the technician repairing the display from sucking clothes in and causing personal injury when repairing the display. In addition, aluminum alloy shutters should be installed on the air outlet of the fan on the outside aluminum-plastic panel to achieve the effect of waterproofing. Wall-mounted full-color LED electronic display screens can also be equipped with air conditioners. Make sure that the air conditioner host is placed in place and does not affect the overall appearance of the wall. The choice of air conditioner is required. Generally, 1.5P, 2P and 3P air conditioners are used the most. The calculation of 12 square 1P air conditioners in northern cities; the calculation of 9 square 1P air conditioners in southern cities. If the area of u200bu200bthe led electronic display screen is relatively large, the air conditioner should be customized directly by the manufacturer. If the area is not large, you must go to the specialty store to buy it. However, the display cooling air conditioner has a call compensation function. 2. If the LED electronic display is installed with a column, it is best to use a fan to dissipate heat. The fan is installed on the aluminum-plastic plate on the back of the large screen, and it is best to lean up and make it into the form of blinds to make it rain. When the rain does not enter the display screen. If it is a double-pillar, open a few shutters in the middle of the double-pillar. This Baiye window is the air inlet, and the fan above is the air outlet, so that complete air convection is formed and the heat dissipation effect is better. The maintenance plan of the LED full-color screen requires a good heat dissipation measure, and the second is to avoid improper operation in use. It is generally recommended to configure a fan or air conditioner to enhance the heat dissipation function.
is a must have for anyone who appreciates lcd monitor supplier to the greatest extent.
If you would like to learn more about , be sure to visit Toponetech touch display
for more information!
For most children lcd monitor supplier is a struggle. If that is also the case for your children, find the solution at Toponetech touch display.Toponetech are your best choice.
Top One Tech Ltd. deems that we can drive consumer transactions using high-tech tools like artificial intelligence and cognitive data sets.