How about the LED display in the hotel banquet hall?

Technology teaches you how to install LED displays in hotel banquet halls. In recent years, indoor high-definition full-color LED displays have been widely used in various fields due to their good display effects and visual experience, whether in station banks or hotel supermarkets. , And even the monitoring command center can be seen everywhere. The following will mainly teach you the installation method of the LED display in the hotel banquet hall, as well as some things that need to be paid attention to in the purchase, so that our hotel customers will not be there when buying and installing the LED display. confused. There are three installation methods for the LED display in the hotel banquet hall, namely: wall hanging, hoisting and inlaying. Here are the three installation methods to adapt to the environment and the installation steps. 1. Wall-mounted wall-mounted adaptable environment: The wall must have sufficient load-bearing capacity, and it is easy to use expansion bolts, ordinary bolts or easy-to-weld walls (such as steel structure walls) to facilitate fixing on the wall Hang the pendant of the LED display. Wall-mounted installation steps: 1. Before installation, understand whether the wall has enough load-bearing capacity to fix the display; 2. After confirming that the wall has enough load-bearing capacity, according to the actual requirements of the customer (installation position, installation height, (Left and right distance) after the actual measurement, make a detailed record, and make a scale on the wall, the scale must be clearly marked to better carry out the next step; 3. Determine according to the height of the touch display The number of pendants to be used should be marked; 4. Fix the display pendants at both ends. And measure with a horizontal pipe to make sure that the two pendants are on the same plane. After fixing the pendants at both ends, install other pendants according to the two pendant planes as the standard; 5. After hanging the display on the mounted pendant, use screws to connect the display frame and pendant firmly; 6. Inspection: display screen To install horizontally, the level of the two ends shall not exceed 5mm. 2. Adaptation environment for hoisting: There are no walls around, and no indoor touch display with fixed points available, but the roof has sufficient load-bearing capacity. Installation steps for hoisting: 1. Know whether the roof or other fixed roofs are available before installation Sufficient load-bearing capacity to fix the LED display; 2. After confirming that the roof or other fixed roofs have sufficient load-bearing capacity, perform actual measurements according to the actual requirements of the customer (installation position), make detailed records, and place them on the roof or other fixed roofs. Make the scale on the top, and the scale must be clearly marked to better carry out the next step; 3. Determine the number of pendants to be used according to the height of the display screen, and make a mark; 4. Fix the two first Hanging pendant on the display screen at the end. And use the cable to measure. After fixing the pendants at both ends, use these two hanging pendants as the standard to install the other middle hanging pendants; 5. After hanging the display on the installed hanging pendant, use screws to connect the LED display frame and the hanging pendant firmly; 6. Detection: The display should be hoisted and mounted horizontally, and the level of the two ends should not exceed 5 mm. 3. Applicable environment for inlaying: installation steps for display inlays that require concealed installation: 1. You must understand the finished size of the display before installation, and then The size of the place to be inlaid is subject to the finished size of the display. 2. Put the entire display screen in the place to be mounted 3. Fix the display frame, use screws to connect the display frame and the surrounding connections firmly. 4. Check that the display screen should be installed flat, and the plane around the frame is in line with the outer surface of the mosaic. The distance must be consistent. Of course, there are many other considerations in it, such as: brand, price, after-sales service, etc. When purchasing an LED display in a hotel banquet hall, you must comprehensively consider all factors and choose the best and most suitable one for yourself. The product.
Top One Tech Ltd. also discusses implications for both research and the practice of operations in building systems to help people succeed in both the short and long run.
Excellent quality yet affordable best at Toponetech touch display. Don't miss out!
For Top One Tech Ltd. as a whole to adopt an attitude of acceptance toward change and technological innovation, we first have to truly embrace it and practice what they preach. Technological development needs to be more than just another investment, but a complete integration.